Materials

FLUOROCARBON / FLUOROELASTOMER (VITON ®)

Hydrogenated Nitrile is also known as saturated Nitrile, is obtained by introducing Hydrogen into the Nitrile to saturate the hydrocarbon chains in the rubber.

AED seals and O-rings (Anti-Explosive Decompression) are typically used in high pressure applications encountered in the Oil and Gas industry.

DuPontTM Vamac® and ethylene acrylate (AEM) products are a comprehensive family of heat and fluid resistant elastomers.

TFE/P is a high temperature polymer which has good overall resistance against a wide range of chemicals including amines, methanol, steam and hot water.

Highly effective in vacuum sealing applications. Good seal for hydraulic systems.

Ethylene-Propylene based elastomers offer excellent chemical and thermal resistance.

Perfluoroelastomers are ideal for use in the chemical and petroleum industries, as well as for the manufacturing of semiconductors and analytical and process instruments.

Fluorosilicone combines the good high and low temperature stability of Silicones with the fuel, oil, and solvent resistance of Fluorocarbons.

Seals in food and beverage applications. Most popular material for non-hydraulic sealing applications. Mainly used for dampeners due to its ability to absorb vibration.

One of the earliest of the synthetic materials to be developed as an oil-resistant substitute for Natural Rubber, Neoprene is a homopolymer of chloroprene (chlorobutadiene).

Nitrile rubber (NBR) is the general term for Acrylonitrile Butadiene Copolymer. It is the most widely used and economical elastomer.

Polyurethane possesses outstanding abrasion resistance and tensile strength over most other O-ring elastomers.

Polyacrylates are copolymers (ethyl acrylates) possessing outstanding resistance to petroleum fuels and oils.

Is the most chemically inert of the O-ring materials, it is a tough polymer possessing an incredible working temperature range.

A group of elastomers, made from silicon, oxygen, hydrogen and carbon, Silicones are renowned for their retention of flexibility and low compression set characteristics, within one of the widest working temperature ranges for elastomers.